Ar 15 Trigger Job: A Comprehensive Guide for You
Are you an AR-15 enthusiast looking to enhance your firearm’s performance? If so, you’ve come to the right place. The trigger job is a crucial aspect of maintaining and improving your AR-15’s shooting experience. In this article, we’ll delve into the details of the AR-15 trigger job, covering everything from the basics to advanced techniques. Let’s get started!
Understanding the AR-15 Trigger
The AR-15 trigger is a critical component that directly affects the accuracy and reliability of your firearm. It consists of several parts, including the trigger, sear, hammer, and disconnect. Understanding how these parts work together is essential for a successful trigger job.
| Part | Description |
|---|---|
| Trigger | The part you pull to fire the gun. |
| Sear | Engages with the hammer to release the firing pin. |
| Hammer | Strikes the firing pin, causing the bullet to be propelled. |
| Disconnect | Prevents the hammer from striking the firing pin when the gun is not in the firing position. |
Now that we have a basic understanding of the AR-15 trigger, let’s move on to the trigger job itself.
Why Perform a Trigger Job?
Performing a trigger job on your AR-15 can offer several benefits, including:
- Improved trigger pull weight
- Reduced overtravel
- Enhanced trigger feel
- Increased accuracy
These benefits make a trigger job a worthwhile investment for any AR-15 owner looking to improve their firearm’s performance.
Tools and Materials Needed
Before diving into the trigger job, ensure you have the following tools and materials:
- Trigger pull gauge
- Trigger job kit (including new springs, pins, and a tool for removing the trigger)
- Hammer and sear spring compressor
- Trigger puller
- Locking pliers
- Replacement parts (trigger, sear, hammer, disconnect)
Having these tools on hand will make the process much smoother and ensure you have everything you need.
Step-by-Step Guide to Performing a Trigger Job
Now that you have the necessary tools and materials, let’s go through the step-by-step process of performing a trigger job on your AR-15:
- Disassemble your AR-15, removing the upper receiver and magazine.
- Remove the bolt carrier group and gas key.
- Use the hammer and sear spring compressor to remove the hammer and sear.
- Remove the trigger from the upper receiver using the trigger puller.
- Inspect the trigger, sear, and hammer for wear or damage. Replace any worn or damaged parts.
- Install the new springs and pins into the trigger, ensuring they are properly seated.
- Reassemble the hammer, sear, and disconnect, making sure they are properly aligned.
- Install the trigger back into the upper receiver, ensuring it is properly seated.
- Reassemble the rest of the firearm, including the bolt carrier group and magazine.
- Test the trigger pull weight and overtravel using the trigger pull gauge. Adjust as necessary.
Once you have completed these steps, your AR-15 should have a significantly improved trigger. Take it to the range and enjoy the enhanced shooting experience!
Common Mistakes to Avoid
While performing a trigger job, it’s essential to avoid common mistakes to ensure a successful outcome:
- Not using the correct tools: Using the wrong tools can damage your firearm or make the process more difficult.
- Not inspecting worn or damaged parts: Replacing worn or damaged parts is crucial
