How to Install an Accu Wedge in an AR-15
Installing an Accu Wedge in your AR-15 can significantly improve the accuracy and consistency of your shooting. This guide will walk you through the process step by step, ensuring a smooth and successful installation.
Understanding the Accu Wedge
The Accu Wedge is a specialized component designed to fit into the magazine well of an AR-15 rifle. It serves several purposes, including providing a stable platform for the magazine, reducing friction, and ensuring a consistent feed.
Tools and Materials Needed
Before you begin, gather the following tools and materials:
| Tool/Item | Description |
|---|---|
| Accu Wedge | The component to be installed |
| AR-15 rifle | The rifle on which the Accu Wedge will be installed |
| Hex wrench | Used to remove and install the magazine catch |
| Gunsmithing hammer | Used to gently tap the Accu Wedge into place |
| Clamp | Optional, used to hold the magazine catch in place while removing it |
Step-by-Step Installation Guide
Follow these steps to install the Accu Wedge in your AR-15:
-
Remove the magazine from the rifle and ensure the chamber is clear of any ammunition.
-
Locate the magazine catch on the left side of the rifle. Use the hex wrench to remove the magazine catch. If necessary, use a clamp to hold the magazine catch in place while removing it.
-
Slide the magazine catch out of the rifle, being careful not to lose the spring and detent inside.
-
Insert the Accu Wedge into the magazine well. Ensure that it is fully seated and that the magazine release button is visible through the slot in the Accu Wedge.
-
Slide the magazine catch back into place, ensuring that the spring and detent are properly seated inside the catch.
-
Use the hex wrench to tighten the magazine catch securely.
-
Load a magazine into the rifle and test the magazine release. The magazine should release smoothly when the magazine release button is pressed.
-
Fire a few rounds to ensure that the Accu Wedge is functioning properly and that the rifle is still accurate.
Common Issues and Solutions
Here are some common issues that may arise during the installation process and their solutions:
-
Magazine Catch Not Seating Properly: Ensure that the spring and detent are properly seated inside the magazine catch. If they are not, gently tap them into place with a gunsmithing hammer.
-
Accu Wedge Not Seating Properly: Check that the Accu Wedge is fully seated in the magazine well. If it is not, gently tap it into place with a gunsmithing hammer.
-
Magazine Release Button Not Visible: Ensure that the Accu Wedge is properly seated and that the magazine release button is aligned with the slot in the Accu Wedge.
Conclusion
Installing an Accu Wedge in your AR-15 can greatly improve the performance of your rifle. By following this guide, you can ensure a successful installation and enjoy the benefits of a more accurate and consistent shooting experience.
